How to Fix Canon Printer Carriage Jam Issue

you have any printing gadget, you realize that the carriage of a printer holds the ink cartridges and even slides forward and backward to transfer ink onto the printing sheet. However, you should realize that if some Paper jams issue is acquired into the machine, it can at times prompt the carriage jams, mostly after you print on the thicker paper. What's more, you ought to likewise realize that the carriage slows down, you will presumably hear a pounding commotion as the printer goes ahead to proceed onward the carriage. It happens in view of the issue that the actuator arm is trapped, which is keeping the carriage and don't enable it to move. On the off chance that you need to determine such issue, you ought to take after the means as proposed underneath:

You have to unplug the power string from the gadget and open the cover to unveil the carriage gathering.

And after that, crush the two levers underneath the paper plate together to remove the plate.

From there on, you simply need to slide the carriage get together from the left half of the printer into the center where you can get to it effortlessly. What's more, when the carriage get together doesn't slide, you can move to the following stage.

From that point onward, push down the substantial dark bar that can be seen over the rollers and after that you have to discharge it with the goal that it springs go down. And afterward move the carriage get together to the privilege once more. On the off chance that despite everything it does, simply forward to the following stage.

Presently, search for the level dark segment seen beneath the rollers in the plate compartment. You will see some level lying part that is parallel with the base of the printer. What's more, when it is pointing upward, simply push it descending.

Presently, you have to slide the carriage get together towards the privilege and put every one of the parts in a right way.

From that point, lift the actuator arm, which is found specifically over the white or dark rigging get together at the left half of the printer. When you lift and discharge it, you ought to need to reestablish it to the correct position.

Furthermore, now, you need to put the paper plate back in the gadget. At the point when the front of the printer stays still open, connect to the power rope and turns the printer on.

You can press and hold Resume, at that point close the front of the printing gadget.